Fly ash brick machine operation and use precautions and points
2021-10-19
We need to pay attention to some things when operating and using fly ash brick machine, not only responsible for our work, but also responsible for our own safety, especially to do some technical work, the staff must take it seriously to avoid mistakes and increase the difficulty of maintenance, the following we will introduce in detail the operation and use of fly ash brick machine precautions and points.
Fly ash brick machine
1, the equipment should run smoothly
Fly ash brick machine operation should avoid misoperation or violent operation, otherwise it will generate shock load, causing frequent equipment failure and greatly shorten its service life. The impact load generated during the work process will cause early wear and tear of the structure of the fly ash brick machine, fracture; will cause shock pressure in the hydraulic system, but also cause damage to hydraulic components, premature failure of oil seals, premature failure of high-pressure oil pipe joints, oil leakage or frequent action of the safety valve, hydraulic oil temperature rise;
In order to effectively avoid shock load, must strictly implement the operating procedures; hydraulic valve should not open and close too fast; work device components move to a limited position, should avoid strong impact; hydraulic no impact function of the equipment can not be used; operators should strictly follow the operating procedures to operate the equipment, after a long period of operation, can be based on the characteristics of the equipment to develop good operating habits;
2, should pay attention to cavitation and spillage noise
Fly ash brick machine operation process, should always pay attention to the sound of the hydraulic pump and safety valve, if the hydraulic pump "cavitation" noise, before use should identify the causes, troubleshooting, if the actuator no load slowly moving, and accompanied by the safety valve overflow sound, should immediately shut down for maintenance;
3、Strictly implement the shift system
Shift operators parking fly ash brick machine, must be strictly checked to ensure the safety and convenience of the operator, the inspection includes whether the hydraulic system leakage, whether the connection is loose, whether the piston rod and hydraulic hoses are damaged, whether the hydraulic pump low pressure inlet pipe connection is reliable, whether the hydraulic oil tank oil level is correct, the hydraulic oil tank also need to check and clean the exhaust port, so that it is kept open, to prevent the blockage of the oil discharge port caused Hydraulic oil tank in a certain degree of vacuum, thus causing hydraulic oil tank suction difficulties or damage to the hydraulic pump;
4, hydraulic tank pressure and oil volume control
Pressure hydraulic tank in the work should always pay attention to the pressure of the hydraulic tank, the pressure must be maintained in the "instructions for use" within the range. When the pressure is too low, the oil pump does not absorb enough oil, easy to damage; when the pressure is too high, the hydraulic system leakage, easy to cause low-pressure pipeline explosion, fly ash brick machine maintenance after the oil change, exhaust the air in the system, should be in accordance with the "instruction manual" to check the oil level, equipment parked in a flat place, and after 15 minutes after the completion of maintenance re-check The oil level should be checked again after 15 minutes of maintenance, and supplemented when necessary.
The above is a summary for the majority of users of fly ash brick machine, as long as the daily operation and use of the process, pay attention to the above points, you can achieve a long time efficient fly ash brick machine trouble-free work to improve the overall performance and life of the equipment.
Automatic hydraulic brick mach...