Agricultural Machinery Maintenance Tips

Introduction: Many farmers attach great importance to the maintenance of agricultural machinery, agricultural machinery idle for a long time, there will be a shortened service life of the situation occurs, how to protect the agricultural machinery for a long time does not work still have a very good performance? Only regular maintenance work, then how to maintain agricultural machinery? Next together to see it!

 

Many farmers attach great importance to the maintenance of agricultural machinery, agricultural machinery idle for a long time, there will be a shortened service life of the situation occurs, how can we protect agricultural machinery for a long time does not work still have a very good performance? Only regular maintenance work, then how to maintain agricultural machinery? Next together to see it!

 

1, replacement of lubricating oil summer and winter lubricants can not be mixed, summer lubricants are susceptible to heat thinning, oxidation resistance is poor, easy to deteriorate, and even cause burning tile holding shaft and other failures. Therefore, the need to regularly check the crankcase and gearbox lubricant quantity, oil quality, problems, we must promptly replace, adding the lubricant to clean, the number of sufficient to avoid causing damage to agricultural machinery.

 

2, test run break-in general new agricultural machinery, need to test run break-in, break-in is over, clean the machine oil filter and remove residual impurities in the oil, if the oil quality problems are found, it is necessary to replace the oil, and clean the oil pan.

3, metal parts of the working surface of the treatment does not contact with the * soil of the metal parts of the working surface should be coated with antirust paint and then coated with waterproof paint. Paint is generally known as the primer and top coat, primer and machine parts to join firmly to play a rust-proof role, the general use of paint to be selected according to the conditions of use of parts.

 

4, the treatment of elastic parts of agricultural machinery elastic parts is the fundamental of agricultural machinery transport, so you need to regularly remove all springs, belts, support the farm equipment equipped with tires, lift the load, if you find that the belt can not be used, to be replaced in a timely manner, can be used to wipe clean, coated with talcum powder, placed indoors, keep ventilation, dry, to avoid belt curling.

5, check for cracks agricultural machinery cracks, it can not be used, generally put the suspicious parts into the kerosene soak 30 minutes, take out dry surface, smear a layer of chalk dust on the surface, and so on for a period of time, if the chalk dust absorbed the cracks seeping kerosene, it will become black, you can check whether the parts have cracks.

6, check whether the cable line is disconnected pump with the cable in use due to repeated folding, twisting, easy to produce a broken line. Generally in its power line in series with a light bulb, the two power lines were connected to the cable in a core of the two ends, after the power supply found that the light bulb, that the line is normal, otherwise it is a core broken, if the line is broken, we must find the location of the broken line to connect, and then wrapped with insulation tape can be.

Pre: What conditions are needed for the durability of hydraulic brick machine molds?
Next: Cost-effective small cement brick making machine equipment is loved by customers