Operation rules for brick free machine

 Operation rules for brick free machine：

1. When the brick free machine is running, it is strictly prohibited to put the tools and hands into the drum to avoid accidents.

2. Check the clutch, brake and wire rope before starting the brick block machine each time, and there shall be no foreign matter in the drum.

3. When using the mixer, it must be placed in a solid place, with a bracket or a foot cylinder for stability, without tires instead of support.

4. When the hopper is rising, no one is allowed to pass or stay under the hopper. After the work is finished, the hopper should be fixed before leaving.

5. Oil cylinder, valve block, valve parts, oil pipe and other hydraulic parts, oil leakage, should be used to replace the oil seal, sealing ring and other maintenance methods or the whole replacement, to avoid sick operation. Oil pump, oil motor in the operation should often listen, look, touch, found abnormal, must stop discharge.

6. Please keep the hydraulic system, oil pipeline and hydraulic station clean.

7. Pay attention to the high oil temperature, which affects the machine performance.

8. When the equipment of brick free machine is repaired, the hopper should be fixed and the power supply should be cut off.

9. The vibration and pressure time of products shall be strictly controlled, and the vibration time shall be adjusted according to the requirements of free brick products. The best ratio between yield and quality shall be summarized, and the feeding quantity or feeding times shall be adjusted to achieve balance when necessary.