Problems in the interpretation of portable brick making machine

Professional brick, hollow brick, portable brick making machine, colored brick manufacturers Bona machines, help you with incurable diseases in the adobe brick making machine. Have any questions, feedback, and help you the first time.

FAQ analysis:
1,Brick, brick break loose, or take off the brick model themselves on hop off when you die, cause head pressure is too low;
(Pressure head pressure is too low, you cannot position the bricks lead bricks loose, corresponds to the pressure oil tank tubing should be gradually turn pressure regulating valve pressure alone, filed under and slightly moving moulds wrench, making pressed oil cylinder to maintain a certain pressure, can keep the mould bricks in the stencil with increased, thereby reducing the breakage rate of block)
2, Found brick to brick a bulging in the Middle due to high pressure oil cylinder pressure on, or vibrated for too short a time, die not in place;(If the bricks are found high breakage rate, ataxia, should hold in mind when supporting mold, or check the ratio of aggregate moisture and, if wet, characterized by interlocking brick making machine is pressed out when large volumes of water, such as dry, characterized by brick not forming, not brick)

3,Pressure regulating valve failure due to damage or failure of the pressure regulating valve, the pressure spring, (pressure spring should be timely replacement of the same model), cylinder if cylinder oil leakage is found, because cylinder seals inside lose their seal and (should replace the corresponding type of seal)
4,Focus on care and maintenance when using the device, so as to reduce maintenance, thus more qualified products; customers specific matters should read the product description carefully, read after the action, smooth brick can be used freely, give full play to the superiority of the device, and extend its service life.